Results 1 to 1 of 1

Thread: Dm7020 hd

  1. #1
    Super V.I.P satco's Avatar
    Join Date
    Feb 2011
    Location
    PAKISTAN
    Age
    46
    Posts
    4,220
    Rep Power
    133

    Dm7020 hd

    DM7020 HD




    Powerful receiver for digital TV and Radio programs.
    Main features are a 400 MHz processor the dreambox DM 7020 HD supports the Linux TV API


    MPEG-2 / H.264 decoding
    10/100MBit compatible Ethernet Interface
    DVB-S2 tuner
    DVB-C / DVB-T hybrid tuner
    mixable, plug & play
    2 x Common Interface
    big size white OLED display


    400 MHz MIPS Processor
    Enigma 2, Linux Operating System
    brilliant white OLED - Display
    MPEG-2 /H.264 Hardware decoding
    DVB-S2 and DVB-C / DVB-T tuner modul
    2 x DVB Common-Interface Slot
    2 x Smartcard-Reader (Dreamcrypt CA)
    Mini USB for service update
    10/100 MBit compatible Ethernet Interface
    3 x USB 2.0 (1 x front, 2 x back)
    S/PDIF Interface for digital bit stream out (AC-3)
    Scart-interfaces
    analog modem
    HDMI
    Audio/Video cinch out
    1 GByte Flash, 512 MByte RAM
    SATA
    - Plug&Play frame for internal HDD 3,5" in any capacity
    eSATA)
    unlimited channel lists for TV/Radio
    channel-change time < 1 second
    automatic service scan
    directly bouquet-lists
    EPG (electronic program guide)
    Videotext Decoder
    multiple LNB-Switching control (DiSEqC)
    OSD in many languages and skin-support

    DVB-S2 Tuner:
    Frequency Range 950...2150 MHz
    QPSK Demodulation EN 302 307
    Signal Level - 65 dBm...- 25 dBm
    Signal-to-Noise Level 12 dB max.
    DBS-Tuner Input Connector F-Type female
    Input Impedance 75 Ohm
    AFC +/- 3 MHz
    Demodulation Shaped QPSK and 8PSK
    FEC Viterbi and Reed-Solomon
    Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
    Roll-off Factor 35 %
    Hybrid - DVB-C/T-Tuner:
    VHF-Kanäle: 2-12 (49...230 MHz)
    UHF-Kanäle: 21-69 (470...861 MHz)
    DVB-C HDTV kompatibel
    Eingangsfrequenzbereich: 51...858 MHz
    Symbolrate: 1 ... 7 Mbaud/s
    Eingangsimpedanz: 75 Ohm
    Tuner Ein/Ausgang: IEC-Stecker
    DVB-C / DVB-T über Software umschaltbar
    Common-Interface:
    Common-Interface Power Consumption max. 0,3A/5V
    Video decoder:
    Video Compression MPEG-2 / H.264 and MPEG-1 compatible
    Video Standard PAL G/ 25 Hz, NTSC
    Video Formats 4:3 / 16:9
    Letterbox for 4:3 TV-Device
    Audio decoder:
    Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
    Audio Mode Dual (main/sub), Stereo
    Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
    Output analog:
    Output Level L/R 0,5 Vss on 600 Ohm
    THD > 60 dB (1 kHz)
    Crosstalk < -65 dB
    Output digital:
    Output Level 0,5 Vss on 75 Ohm
    Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
    S/PDIF-Output optical, coaxial (AC3)
    Video parameter:
    Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
    Teletext filter in conformity with ETS 300 472 Standard
    TV-Scart:
    Output: FBAS, RGB, S-Video
    Mini USB service Interface:
    Function: Update of Firmware
    Ethernet:
    10/100 MBit compatible interface
    Function: Update of Firmware
    USB:
    USB 2.0 connector (3x)
    SATA Interface:
    for internal HDD
    eSATA
    LNB power and polarisation per tuner:
    LNB Current 500mA max.; short-circuit-protected
    LNB Voltage vertical < 14V no load, > 11,5V at 400mA
    LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
    LNB power off in Standy mode
    Count of active satellite position:
    DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)
    Power consumption:
    < 15W (in operation, with LNB)
    < 13W (in operation, no LNB)
    < 1W (Deep-Standby-Mode)
    Input voltage:
    230V / 50 Hz alternating current +/- 15%
    110V / 60 Hz alternating current +/- 15%
    switchable
    Physical specification:
    Ambient Temperature +15°C...+35°C
    Humidity < 80%
    Size (W x D x H): 372 mm x 232 mm x 75 mm
    Weight: 2,5 kg without HDD
    Attached Thumbnails Attached Thumbnails 7020hd_prod.jpg  

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •